Specifications
Connectors
- Link under test:Std USB 3.1/PD A and Std USB 3.1/PD B
- Logic:2 x 8 inputs / outputs with configurable level and threshold
- Sync: Ability to synchronize units by sharing the same clock
- Control: Optimized USB 3.0 connection to the PC
- Power: 9-24VDC, min 12W
Supported Protocols
- Power Delivery 1.3 (FSK) & 2.0 (Baseband)
- USB 1.0 / USB 1.1 (1.5 and 12 Mbps)
- USB 2.0 (1.5, 12 Mbps and 480 Mbps)
- USB 3.0 (5 Gbps)
- USB 3.1 (10 Gbps)
- The availability of the protocols depends on the edition and options
Supported Modes
- Analyzer: non-intrusive protocol analyzer
- Generator: traffic generator for emulating host, device, sink, source
- Examiner: compliance tester
- The availability of the modes depends on the edition and options
Analyzer Capabilities
- Concurrent capture of USB 2.0, USB 3.x, Power Delivery, Vbus and logic signals
- Multiple-unit synchronization capability
- Automatic termination detection
- Pre-capture traffic filtering
Generator Capabilities
- Simulate USB host or device
- Simulate PD sink or source
- Precise and reproducible timings
- Ability to emulate low-level issues as well as high-level behaviors
USB 1.x / 2.0 Capabilities
- Support of Low-speed, Full-speed and High-speed
- Automatic speed detection
- Precise tracking of line states
- Non-intrusive probing
- Timing resolution of 16.7 ns
USB 3.x Capabilities
- Support of 5 Gbps and 10 Gbps
- Automatic speed detection
- Automatic termination detection
- Non-intrusive signal reshaping
- Flexible front-end with adaptive equalization and configurable emphasis and swing
- Timing resolution of 400 ps
USB Power Delivery Capabilities
- Non-intrusive probing
- Support of FSK PHY
- Support of Baseband PHY
- Support of Type-C CC via custom cable
- Measurement of FSK carrier frequency, amplitude and bit rate
- Configurable FSK amplitude in generator mode
Vbus Capabilities
- Measurement of Vbus from 0 to 25V
- Measurement of Ibus from -5 to +5A
- Generation of Vbus from 4 to 20V
Logic Capabilities
- 16 inputs / outputs
- Configurable level and threshold (2 banks of 8 signals)
- Timing resolution of 400 ns
- Bandwidth of 50 MHz
Power Adapter
- Universal 100-240 VAC, 50-60 Hz
- 24 VDC, 18 W
Enclosure
- 96 x 96 x 16 mm (3.8 x 3.8 x 0.6'')
- 0.3 kg (0.6 lbs)
Maintenance and Licensing
- Free lifetime updates – no maintenance fees
- Free full-featured viewer application – easily share annotated traces between computers and colleagues and replay captured traffic
- Use Ellisys hardware on any computer – no additional licenses needed
Product Warranty
- Two years limited warranty
Minimum Requirements
- Pentium 4, 1 GHz or compatible processor
- 1 GBytes of RAM
- 1280 x 1024 display resolution with at least 65,536 colors
- USB 2.0 host controller
- Windows® Vista or higher
|
