Explorer 280 USB Protocol Analyzer

Technical Data
Explorer 280

 
Specifications
Analyzer Characteristics
  • Supported specifications: USB 3.0, USB 2.0, and USB 1.x
  • Supported link speeds: 5GT/s, 480Mb/s, 12Mb/s and 1.5Mb/s
  • Timestamp accuracy: 2ns for USB 3.0, and 16.7ns for USB 2.0/1.x
  • Low-level error detection: CRC-5, CRC-16, CRC-32, state transition errors, invalid PID, framing errors, frame sequence errors, length errors
  • Bus states: detection of SuperSpeed link operating states and all USB 2.0/1.x electrical bus states
Generator Characteristics
  • Supported specifications: USB 3.0, USB 2.0, and USB 1.x
  • Supported link speeds: 5GT/s, 480Mb/s, 12Mb/s and 1.5Mb/s
  • Supported modes: host or device emulation
  • Timing: 2ns for USB 3.0, and 16.7ns for USB 2.0/1.x
Instant Timing View
  • Nanosecond-precise display
  • Automatic quotes of important timings
  • Concurrent USB 2.0 and USB 3.0 display, as well as Vbus voltage and power display
Embedded Memory
  • 4 GBytes of FIFO Memory
  • Data is stored in highly optimized format
  • Analyzed data is uploaded in real time through a USB connection
Front Panel Connectors
  • Link under test: USB 3.0 STD-A and STD-B
Rear-Panel Connectors
  • Computer interface: USB STD-B
  • Auxiliary equipment: supports connection of extension boards
  • SMA trigger: in and out, 50 Ω, max 5VDC
  • Inter-equipment: in and out, supports connection of several units together
  • Power: Max 25W
Front Panel Indicators
  • Power: unit powered on
  • Operating: unit performing requested task
  • Trigger: trigger event detected
  • Link, Receive and Transmit for US and DS
Power Supply
  • 12VDC nominal (accepts up to 24VDC)
  • Universal 90-264VAC, 47-63Hz, Energy Star
Enclosure
  • 174 x 111 x 58 mm
  • 1.2 kg
Hardware upgrade
  • The decoding engine is automatically updated with each software release  (no user intervention required)
Warranty
  • Two-year limited warranty

Ellisys reserves the right to change the features and specifications of the product without notice.

Minimum Requirements
  • Intel Pentium 4, 1 GHz or compatible processor
  • 1 GBytes of RAM
  • 1280 x 1024 display resolution with at least 65,536 colors
  • USB 2.0 EHCI host controller
  • Windows® XP Service Pack 2 or higher